Product ID:MOLECULAR SEIVE 13X ZEOLITE 13X
MSDS Date:01/01/1987
FSC:6850
NIIN:01-151-4214
MSDS Number: BWNPH

ZEOCHEM

LOUISVILLE, KY 40232
US

Emergency Phone: 502-634-8384

Info Phone: 502-634-7600

Cage: 3U848

ZEOCHEM

35940 LOUISVILLE, KY 40232 US

Telephone: 502-634-8384

Cage: 3U848

SODIUM OXIDE

CAS: 1313-59-3

Fraction By Weight: <30%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <50%

OSHA PEL 10 MG/M3 RDUST; Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9394

ALPHA-ALUMINA (ALUMINUM OXIDE) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

CALCIUM SODIUM ALUMINOSILICATE (ZEOLITE,CAA,TYPE 5A)

CAS: 1344-01-0

SODIUM ALUMINOSILICATE (ZEOLITE,NAX,TYPE 13X)

CAS: 1344-00-9

MAGNESIUM ALUMINUM SILICATE (CLAY)

CAS: 1327-43-1

Fraction By Weight: 15-23%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 0-2%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9495

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION MAY CAUSE
IRRITATION/INFLAMMATION OF UPPER RESPIRATORY SYSTEM. INGESTION MAY
CAUSE GI TRACT IRRITATION/UPSET. EYE CONTACT MAY CAUSE
IRRITATION/CONJUNCTIVITIS. CHRONIC: PROLONGED OR R EPEATED EXPOSURE
MAY CAUSE SKIN IRRITATION/DERMATITIS.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED: IRRITATION. EYES: IRRITATION. SKIN:
IRRITATION. INGESTED: NAUSEA, STOMACH UPSET, IRRITATION,
IRREGULARITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALED-REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
BREATHING STOPPED. KEEP PERSON WARM & QUIET. GET MEDICAL ATTENTION.
EYES & SKIN-WASH AFFECTED AREAS IMMEDIATELY & CAREFULLY FOR 15
MINUTES. GET PROMPT MEDICAL ATTENTION. INGESTED-IF CONSCIOUS, GIVE
EMETICS TO CAUSE VOMITING. MILK & FATTY ACIDS SHOULD BE AVOIDED.
GET IMMEDIATE MEDICAL ATTENTION.

Flash Point:NON-FLAMMABLE
Extinguishing Media:WATER, CARBON DIXOIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR FULL PROTECTIVE
CLOTHING INCLUDING POSITIVE-PRESSURE SELF-CONTAINED BREATHING
APPARATUS. USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NEGLIGLBLE FIRE & EXPLSOION HAZARD WHEN
EXPOSED TO HEAT OF FLAME BY REACTION WITH INCOMPATIBLE SUBSTANCES.

Spill Release Procedures:NORTIFY SAFETY PERSONNEL IMMEDIATELY. CLEAN-UP
PERSONNEL NEED PROTECTION FROM DUST/FUMES. EYE PROTECTION REQUIRED.
VACUUMING OR WET CLEAN-UP METHODS PREFERRED. KEEP DUST DUST
GENERATION TO MINIMUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATHING DUST & PROLONGED
CONTACT WITH SKIN. CAUSES EYE IRRITATION & BREATHING DUST MAY BE
HARMFUL.
Other Precautions:NOTE TO PHYSICIAN-THIS PRODUCT IS A DESICCANT &
GENERATES HEAT AS IT ABSORBS WATER. THE USED PRODUCT CAN CONTAIN
MATERIAL OF A HAZARDOUS NATURE. IDENTIFY THAT MATERIAL & TREAT
ACCORDINGLY.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR OR SUPPLIED
AIR RESPIRATOR OR SCBA, AS REQUIRED. USE IAW 29 CFR 1910.134 AND
MANUFACTURER'S RECO MMENDATIONS.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT REPEATED
OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
INFO IS SUPPLEMENTAL TO MSDS UNDER CAGE 00334 THIS NSN-VENDOR SUPPLIED
THIS MSDS AND THE OTHER BY CAGE 00334.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>2912F,>160
Spec Gravity:0.675 G/CC
Appearance and Odor:PRODUCT MAY APPEAR AS LIGHT TAN BEAD, CAKE OR
POWDER-PART OF HUMIDITY INDICATOR
Percent Volatiles by Volume:<5

Stability Indicator/Materials to Avoid:YES
OLEFINS, HYDROGEN CHLORIDE, OTHER CHEMICALS WHICH HAVE HIGH HEATS OF
ABSORPTION.
Stability Condition to Avoid:AVOID EXPOSURE TO MOISTURE OR INCOMPATIBLE
MATERIALS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.